Transcript
installing a new BCM on Ford Raptor. So, let me select I'm trying to use this machine to see if it can replace the IM that I used to use. So, let me select Ford. Let me go to F and select Ford. And you can see whenever you press it, the BCM is Ving. Okay, the key is program. So, let me go to auto scan or let me select by model US. And because the BCM is brand new, the moment you place the key into the cup, it lens it automatically. So you can see transl it automatically the moment I start pressing the key button. You can see programming successful. Yeah. But the ignition cannot turn on. Although it can lock and unlock the key.
The ignition cannot turn on. So let me see if no key detected. It still can't see the key. So let me do that with these two. This F150 is F F150 Raptor 17 to 18. Let me click on okay. Ignition cannot be turned on. So let me see if it's going to work. If I'll be able to program the key with this. Yeah. So let me go to add key. I'm not doing all key loss. Yes, hazard is turned on. Let me press on. Okay. Okay. Ignition cannot be switched on. So, let me click on okay. Let me wait for it to communicate and see if I'll be able to turn the ignition. Although it keeps telling me ignition keep programming successful, but still the ignition doesn't turn on.
Okay, I have the key in it and key matching field. Wow. So, let me count the number of keys. It's only one. So, let me find another key. Let me generate another key and add it to it and bring you guys back. Okay, now that it has this key that it is not the ignition is not turning on and it keeps reporting learning successful that means the BCM is in learning mode. So let me try and do synchronization and see if I'll be able to synchronize it. Ignition can't turn on. So I have to find another key and add it to the system. Then I'll see if the ignition will be able to turn on. But for now I have to hold on and see.
So it is almost done. So this synchronization is like doing perimeter reset and it is almost done. Let me turn on my 90. So it's almost done. But I don't know why the BCM can't turn the ignition on. Although I have all this key. So what I'll do is because the BCM is brand new. Okay. So now it is done. So I'll use for scan to write the as data and every data that I need into it. And let me add another key to it. So let me do the auto generation and bring you guys back. So what I'm doing is I'm generating this key and you can see the frequency is not the same. This vehicle's frequency is 903 MHz, but I'm generating 315 MHz.
The reason why I'm doing this is this key cannot generate the 903 MHz. So if I use this frequency, the remote side is not going to work. But the ID side which is ID 49 that that is going to work. So it will only register the ID 49 so that the system will see that there is two keys in the system. Then from there we can continue with our programming. I just want the ignition to turn on. But with this one even only first key should turn the ignition on. But I don't know why the two keys are not turning the ignition. Uh the original key is not turning the ignition on. So after that I can regenerate this key to any other key that I want.
So it's no compulsory that I have to get the 902 because the auto has a special key for that and this frequency cannot do that. So let me generate it to this key complete and let me go back. So if you check the ids, let me check the ID. That's the most important thing. Let me do the read and check the ID. You can see I'm having ID 46. Sorry, ID 49. Let me scan the original key also and see if that one is also going to come up as ID 49. Yeah, and that one comes up as ID49. So, let me add that key to it. So, I'll place it in the hole in the keyhole. Then press the proof to start. Then see if the system is going to tell me.
You can see that now that the second key is program successful, the ignition is turning on. Yeah. So now I have two keys. But this the remote side is not going to work. But just that I have two keys. That's the most important thing that I need now. And it's telling me it is in factory mode. So I'm going to work on that. So if I read the keys here, it show the ignition is on. Oh no, let me go back. The ignition is on. You can see I have two keys. So I don't need the frequency. But with this one, the lock and unlock button work. Let me turn off the lock and unlock button work. So that's the most important thing.
So now I'm done with this. And I did the perimeter reset and you can see the car is running perfectly. But my BCM is having an issue. So I have to reprogram my BCM and you can see the car is starting as I use the module synchronization. So I'm done with this one. The next thing I have to do is to write the asu data to it and also update the firmware using forcan. And I'll do that and call it a fix. Thank you guys for watching. Subscribe to my channel for more videos. I'll do so that all the lights will go off. So this is a successful job. So now I have to place this key down and I'm done. It requires two keys.
So this guy is in a factory mode. So what I can do is I can just clear all the fourth codes and see which ones will be remained. So let me do clear fourth codes in the BCM and let me go back to the BCM and see which fourth code is in it. So now I've not done the programming yet, the online programming yet. So I'm trying to see if I can use this to take it out from the factory mode. Then I know that okay this what the limitation of these two. So all is that I want to know the limitation of the two and let me see everything just shut down. So aha so this is the main issue which is initialization configuration not complete.
I have to do online programming and do that. So this is the fourth code in the system. But let me go to special function and see if I can have anything like taking it out of um factory mode. No factory keyless entry. So it has its own code then keypad learning. No. So let me go to forcan and do all the rest. Then I'll bring you guys back and we see the number of fourth code remain in the system. Then from there we'll know how to go about it. So let me go back and you can see I'm having like 25 cooks. So let me go back and do it. Let me go to service and see body and let me see security battery management.
I have to do all these things. What is this? Okay to let me see smart link programming. Let me see where it will take me to. Let me see. It says state vehicle and press. Okay. Why is the full finished? So, let me go back and come back later. So, I'm done programming and everything is perfect. You can see that the BCM has no fault in it. Yeah, everything is perfect. So, what I'll do is um I'll tell the clients I'm done, then I'm good to go. Thank you for watching. Subscribe to my channel for more videos.