Transcript

car was brought to us to come uh to work on it because the cluster you can see the RPM is not reading and nothing is showing because the oil light is not going off and it's just blinking and showing as code. So what I'll do is I'll scan the class uh I'll scan the whole system. I'll scan the whole system and see the actual problem why I'm not getting RPM because with these vehicles they communicate on can line for the instrument cluster to get any RPM. It has to be on the can line. So I'll scan it and see the fourth code that I'll find in the system that will lead me to the next place to go to.

So open the diagram. So you would No, no, no, no, no, no, no, no. And diagnosis. Let me bring you guys back again. I wanted to use the other version rather. So with this one, I'll scan it and see the fourth code that I'll be getting in the system. That help me to uh that help me to identify what to do. And there is no RPM. So I don't know if it is from the cluster or it is communication issue in the system. It is communication issue in the system. So with this one what I'll do is come give me some few minutes. Let me select any of them for now. Okay. So let me do highspeed scan and see the modules that I'll be able to communicate with that will help me to know what to do from here.

You can see I've been able to communicate with every let me say almost all the module apart from the reader apart from the reader left and right and the meter. So I don't know why I'm not able to communicate with the cluster but I'm having this I'm having this on the cluster is turning on. So I'll go into my wiring diagram then I'll bring you guys back. So uh let's see some of the first code. So you can see lost communication with the cluster. That's why the RPM is not showing and the oil light is still on. So let's go into our wiring diagram and see if we'll be able to find anything and test and know what if it is the cluster.

We tell the client that the cluster is faulty. If you see any time I move the panels here it it works. That tells me that the cluster is working just that it is not communicating. And when you come to my diagram, when you come to my diagram, all right, the cluster is on this page. So that's the combination meter which is not working and it works with three can lines. So it has three I think it has three different can lines because you can see purple and red purple and blue then purple and light green purple and light blue and I have to trace them. So it comes to this conjunction and I'm able the problem is I'm able to communicate with all these modules.

So let me move to this side and see it says under left end of the dash. Let me see where this scan line also go. It goes to the BCM and it also goes to page 9 uh page 9 and 10 on the next page of the diagram which is this. So let me follow it up. So when you move from here um 9 and 10 you trace it to 18 and 17 on the next page. So let me see 18 and 17. Let me go up rather. So 18 and 17. Let me trace that wire and see where it goes and see if it goes to another junction. Yeah. And it goes to another junction which is left pillar, right? Left uh left D-pillar. And that's where it's able to communicate with the um backdoor control module.

And also let me see if I'll find any other control module that is able to communicate with it. 8 and 9. Let me go to the next one and search for 8 and 9. So this is 8 and 9. And 8 and 9 goes to another junction. and that junction. So the best thing is I have to test all the can lines on this pin. I have to test all the can line which is um the combination meter. I have to test and see pin 18 and 19 I have to test the can line and pin 39 and 40 I have to test the can line. So I'll do that and bring you guys along. Here is um the cluster also. So with the cluster this is the socket we are looking at.

So that means it's a 40 pin socket which is 39 and 40 and 19 and 18. Those are the pins that sorry those are the pins that I'm going to test. Um related to those are the pins that I'm going to test now. So because power and ground is not needed because the cluster turns on. So that's the two can line. Sorry that's the two can lines that I'm going to test. Then I'll bring you guys along as I'm doing my testing. So now what I'm going to do is to test the can line. So from this side that's the 40. That's the 40. And this is the can line that I'm getting. This doesn't look like a good can line. And it looks like only one message is moving.

So let me move to the next one. And you can see even the next one. Let me bring my trigger down. Let me bring my trigger down and see if I can get something. And you can see this is a bad can line. Sorry for the glare. This is a bad can line. And let me count this one up to 18. So if I count, let me see if I'll be able to get to 18. So uh what I've done is uh I've read up to so when this supposed to be a 20 pin right so this is 20 then 19 18 and when you check my scope it is out of range and when I come here again to measure the second one which is 17 that one through is out of range so I'll go to my wiring diagram let me let me do this quickly ly I'll go to my wiring diagram because I don't know why it is out of range and there is no pin on the 19 but on the 40 and 50 there is spin.

So let me see my wiring diagram. So this is my wiring diagram, right? And it tells me purple and green and purple and blue, light green and light blue. Then let's go to 18 and 19. That's blue and red, right? But from my connector, if I check my connectors, there is no blue and red over here. So I'm not going to follow them. And the blue and red I'm getting is on this line. Okay. So then that means this will be the can line. So that means one will start from here and it will end here because this 40 39 32. So this Yes. So this is where sorry for me leading you guys out still. So this is my blue and red and the red is on 19 and the blue is on 18 and that's the exact thing.

So if this is 40 and 39 this is 20 and this is 19 and this is 18. So this is what we are getting. There's no communication on that line. Right. And let me see this one also. Let me see this one also. And this is what I'm getting on that line. There is no communication. If there's communication, there is resistance which is pulling it down. So now what I'm going to do is I'm going to disconnect the socket and see if my communication will pop up. Let me do that and bring you guys back. So, so far this what I'm getting from here and let me change it to the next one. And this is what I'm getting from this.

Right? So that means those two line there is a huge resistance in them all. There is no communication at all. You can see what I'm getting. So let me go to the 40. Let me check the 40 and the 21. You can see the 40 also. Let me check the 39 and this is the 39. It looks like only one communication that is going through. So the best I can do for myself is now I have to trace it to the point where they are telling me I can get access to. So I know it is not from the cluster hazard now. So now I have to do the tracing and trace the two wires to where to their destination. Right? So the moment I disconnect the cluster, you can see the car just went off once.

But if the cluster is there, that was the customer may complain and it drains the battery. If the cluster is there, you can see the cluster is even on. And when you turn it off, you can see the engine is off, but the cluster is still on. the cluster doesn't go to sleep and that's what is draining the battery. So for now let me finish with my communication issue. Then from there I'll know where to move to the next one. So now I have to go and find the next junction that this wire goes to the 18 and the 19. Then I'll go and find another junction where the 43 and the sorry the 40 and the 39 goes to.

So let me find out and bring you guys back. So now so um what we do is now you have to trace these two can lines right first it goes to this junction and there is no socket in between like the way there are sockets in these two places. So it could be that one of these sockets is off. But before I can say anything related to it, I have to find for the junction which says left end of dash, right? And before I go and check this sockets and see what is going on in there, why maybe the communication from the BCM is not getting to the other modules. So before that I also have to test the 40 and the uh 39 and that one also says left center of dash right so that means it has to be in the left center of the dash.

So now what I'll do is um I have to check the current communication issue and this is the headache thing I'm going to do. So now the best I can do for myself is to start testing from here. So go and find this socket right then test continuity. If I get continuity then I'll test the can line and see if any of this or there is break in here that's causing the whole issue before I move to this side at least this side I'm getting some message but just that I don't know the exact message or I'm not getting the exact message that I need. So let me do that and bring you guys back. So now after a long while I've tested continuity from this to the BCM.

This is the BCM and you can see it is beeping on the same. It is beeping right. So that tells me that there's continuity. So now I have to move to the next target. Right? So the ignition is on though. So now I have to move to the next target. I have to go and find the next target then work on that. So from this wiring diagram it shows me that uh when I tested from here to here I was getting uh the beeping that means there's continuity. So the next thing I have to do is I have to test from this connector to the next connector which is 9 10. Let me see where 9 10 goes to. 9 10 goes to 18 and 17.

18 and 17 goes to 18 and 17 goes to this charing connector. So it goes to this charing connector which is the pillar B. So the next thing I have to go is to go and search for the B-pillar which is always at the back. So let me go and do that and see if I can find the B-pillar then I can move or know my diagnosing from there. So we'll get we'll bring you guys back when we are done with the B-pillar. So let me go and find for the B pillar. So now we have traced to this point and you can see the B connector that they showed us. So we are going to check why the can line is down right. So one of this wire comes from the front that we check the left um the left end of the dash and the remaining go.

So from the diagram from the diagram you can see. So now we are on this connector. So the best we can do for ourself is to test or now we have to disconnect the modules and see which of them has bring the can line down. So you can see automatic bar gate controller. We have to disconnect that one. Then from there because you can see it looks like the vehicle had an accident from the rear. So it could be that there's a problem over there. Then you can see it goes to another can line. So let's see. Let's disconnect that one and see if our can line is going to come back on. So we'll connect it from this side.

Then we'll So with this one what I have done now is um I'm back probing this connectors. So let me try let me try this one first. All right. Then you can see we are getting some voltage but this is the same thing I get when I probe it from the cluster. So it looks like the problem will be from this side. So, I'm going to trace to the back unit because it has had an accident. What I think I'll do now is disconnect it. And because this frame is having an issue, I'll trace and see if I'll find the location of it. So, let me see if this is it. I've seen some box here. Let me just disconnect it and see if my can line on that can is going to back.

And voila. You can see now my can line is back. And now I know for sure if I should fix the cluster. The cluster should be working. You can see there is can line. Although the can line is a bit messed. So let me go and fix the cluster and see. So that was the unit that brought the can line down and that's why the can line wasn't able to communicate with the cluster. So now let me fix this cluster and see if um I'll get communication back then I thank God for it. So now you can see the battery light. First sign is the battery light has gone up and it's left with only the brake light and you can see now the RPM is showing.

So that means the P is also showing. So that means there is communication. So it was the unit that brought that can line down and didn't allow the cluster to communicate. So it's not only the cluster, it will be other modules also. Let me go. So, what I'm going to do is the moment I plug it back, I'm sure it is going to bring the whole the whole thing down again. When I plug it, this unit is going to bring the whole thing down. And you can see the oil life and everything is down because now the cluster is not communicating with the PCM. So, this is the problem that we are facing. So now I'll tell the client that this back module is having an issue and I can try and also disconnect disconnector but not not now.

So now the main problem is it is fixed and now the RPM and everything is showing. I can't turn it off now because the vehicle run uh drain the battery. So I can't turn it off before I'll turn it off. If I have to let it charge a bit, then I'll turn it off and see if the system um if the cluster will go to sleep. But for now, I tell you it is done. Thank you for watching. Subscribe to my channel for more videos. So, you can see my RPM. That's the smiling guy. So, I'll scan it, fix the diagnosis. I'll scan it and see the fourth code that I'll get in it and see how best I can go about it. And you can see now the temperature is even showing.

So now I'm having a healthy can line and this should tell me that my can line is okay and it is perfect. Thank you for watching. Subscribe to my channel for more videos. So now I'm able to communicate with the meter first. You see I was not able to communicate with the meter. I was able to communicate with the meter and I don't know if the fourth code is going to erase because they will ask me to because of the gateway module. I need to bypass the gateway module but I'm not doing that. I'm going to try and see if the fault code could to be raised. The reason why the ECU gateway is not going to erase is because the checking uh sorry the I say the check engine the engine is running.

So that one is not going to erase. So let me see if it is truly erasing it. If I want to erase this code, I have to just bypass the whole system and erase it. But I'm not going to do that now. And which is something I can do because of the gateway. That's why I will not be able to erase certain for. that if I'm able to bypass the gateway that one I'll be able to erase or with this one I can use EOBD to erase the fourth codes in them and now the air condition and everything is working. Thank you for watching. Subscribe to my channel for more videos.

Seek backward 5s ←
Longer seek (10s) Shift ←
Play Space Seek forward 5s →
Longer seek (10s) Shift →
0:00 Auto-scroll A Copy link at current time S

Outlander 2022 Lost communication with INSTRUMENT CLUSTER (IC)