Transcript
Welcome to Zero Runout. These are Wera 7148C, CM, and CF bit holders. I'll compare fit, magnetic retention, and double-ended bit compatibility. The C is my usual choice for standard quarter-inch hex bits. The CF adds automatic locking and a spring-assisted release. The CM keeps the C's locky system and adds a magnet. That small change affects which double-ended bits can fit properly. Push the C's sleeve toward the bit to unlock it. Insert the bit and pull the sleeve back to lock it. Inside, the C uses four locking balls and no magnet. Two of the six internal flats each carry two balls. Locked in, this one has almost no perceptible play.
It also accepts the double-ended bits I use in these builds. The CM uses the same four-ball arrangement with an added magnet. You can feel it pull this steel bit into the holder. The mechanical lock still secures the bit once the sleeve is closed. With a suitable bit, the locked feel is very close to the C. But, the magnet leaves less usable depth inside the holder. This double-ended bit cannot seat far enough for a proper stable lock. So, I don't recommend a CM for double-ended bits. Now, for the CF, which has two locking balls and a magnet. Here, two of the internal flats each have one ball.
Push a single-ended bit straight in, and it locks automatically. Push the sleeve toward the bit, and the mechanism moves it forward. Weha calls the automatic lock self-lock and the release easy out. That makes the bit easier to grab when it's time to change it. It accepts standard single-ended insert bits and longer power bits. Double-ended bits don't seat properly in this holder. Compared with the C, this example has a little more play. The magnet can attract a steel bit that isn't magnetized. My guess is that it also helps control the bit during release. That's why I'm gradually replacing CF options with the C and MI builds.
The CM costs more, but it gives me the firmer feel I prefer. It also retains the magnetic function for customers who want it. For these builds, I find that combination more useful than the CFS eject action. This Milwaukee Quick Release holder is another option I like. Push the bit straight in and it locks automatically. Pull the collar toward handle to release the bit. The action is straightforward and easy to use for quick bit changes. I'll check it with the same bit, so you can compare the feel. There's a little play, but I find it quite usable. It doesn't feel quite as tight as the Wiha C. After trying these holders in different builds, the C and CM remain my favorites.
Choose the CM if you want magnetic retention with the firmer locking feel. Choose the C if you don't need a magnet or use double-ended bits. The C gives those bits room to seat properly and lock securely. For my double-ended bits, the CM is not a suitable choice. This Milwaukee holder doesn't grip this double-ended bit properly, either. It seems to fit, but there's too much movement. So, my first choices are still the Wiha C and CM. The Milwaukee is a practical alternative if value is your priority. To me, the Wiha's tighter fit feels closer to a fixed-blade screwdriver. I'm gradually phasing out the CF in favor of the CM.
That's how I choose my bit holders.